Comments on: 1966 Dart GT IRS Project Journal Part 2

By: 1966 Dart GT IRS Project Journal Part 2 CarDomain Blog | Wood TV Stand

1966 Dart GT IRS Project Journal Part 2 CarDomain Blog | Wood TV Stand — Sun, 31 May 2009 21:52:20 +0000

[...] 1966 Dart GT IRS Project Journal Part 2 CarDomain Blog Posted by root 6 minutes ago (http://blog.cardomain.com) Cardomain tv i knew that the best way would be to mount my subframe to the bulkheads where the leaf springs were attached the next thing i did was make a wood stand to put the frame diff approximately where post a comment please login to cardomain to post Discuss | Bury | News | 1966 Dart GT IRS Project Journal Part 2 CarDomain Blog [...]

By: TJ

TJ — Tue, 10 Feb 2009 14:52:58 +0000

So this is who jacked the two rear wheels from my Ford Ranger. Might as well take my front ones too and have the matching set of 4.

By: MoPars Rule

MoPars Rule — Sat, 24 Jan 2009 02:52:15 +0000

You rock! Why am I *NOT* surprised it’s a MoPar guy home-brewing the cool stuff? The chebby guys are probably looking at your project saying, “where do the slapper bars go?”

By: Bobbito

Bobbito — Sun, 18 Jan 2009 05:17:22 +0000

This is the best thing I’ve read in a loooong time. Keep the posts comin’ Man!

By: J-S

J-S — Sun, 18 Jan 2009 00:38:15 +0000

Nice work man ! I’m getting started in fabrication and welding so I really appreciate seeing your work. Looking forward to see the completion.

By: audiobahnv8sho

audiobahnv8sho — Sat, 17 Jan 2009 20:41:42 +0000

Its nice to see some garage engineering still alive in the world. You obviously aren’t a “It works on paper so it must work in real life” engineer.

By: vince

vince — Sat, 17 Jan 2009 07:22:26 +0000

soildworks eh? ive only used pro/e but on tuesday im geting solidwroks….as 4 the build great job can’t wait 4 nxt step

By: Maffew

Maffew — Thu, 15 Jan 2009 13:36:49 +0000

WOOT! Give it up for SOLIDWORKS!!! I use it everyday, seeing as how I’m a draftsman and all… Nice modeling, did you do it? KILLER PROJECT BTW!

By: hydro mechanical metal forming

hydro mechanical metal forming — Thu, 15 Jan 2009 06:40:11 +0000

Very interesting and impressed article.I enjoyed well while reading.Each and every line I read it.After finishing I feel its difficult to do.I should start from the basics.Then it will be easy for me.Anyways thanks for your posting.

By: Mike Eyler

Mike Eyler — Thu, 15 Jan 2009 03:59:44 +0000

Cool project! Any chance you’ll be able to weigh it and compare it to the weight of all of the components you took out?